Cara Setting Weight FRRouting 10 di Debian 13
Misalkan ada 2 Peer
R1 (ASN 100)
R2 (ASN 300)
Debian 13 (ASN 200)
nah ceritanya si ASN 100 dan ASN 300 , dua dua nya advertise 103.146.147.0/24 , nah kita menginginkan agar si debian 13 selalu memilih 103.146.147.0/24 agar selalu lewat ke ASN 300.
langsung saja..
kita config di /etc/frr/frr.conf
ip prefix-list ALLOW-IN seq 5 permit 0.0.0.0/0 le 32
ip prefix-list ALLOW-OUT seq 5 permit 160.22.101.0/24
ip prefix-list ALLOW-OUT seq 10 permit 103.84.208.0/24
ip prefix-list ALLOW-OUT seq 100 deny any
!
route-map IMPORT permit 10
match ip address prefix-list ALLOW-IN
exit
!
route-map EXPORT permit 10
match ip address prefix-list ALLOW-OUT
exit
!
route-map PEER1-IN permit 10
set weight 50
exit
!
route-map PEER2-IN permit 10
set weight 200
exit
!
router bgp 200
bgp router-id 160.22.101.1
neighbor 192.168.16.1 remote-as 100
neighbor 192.168.17.1 remote-as 300
!
address-family ipv4 unicast
redistribute connected
neighbor 192.168.16.1 route-map PEER1-IN in
neighbor 192.168.16.1 route-map IMPORT out
neighbor 192.168.17.1 route-map PEER2-IN in
neighbor 192.168.17.1 route-map IMPORT out
exit-address-family
exit
0 Response to "Cara Setting Weight FRRouting 10 di Debian 13"
Post a Comment