Cara Configurasi MPLS TE di MikroTik
------------------------------------------
R1
------------------------------------------
/routing ospf instance
set [ find default=yes ] mpls-te-area=backbone mpls-te-router-id=lo redistribute-connected=as-type-1 router-id=192.168.255.1
/mpls traffic-eng interface
add bandwidth=10Mbps interface=ether1-to-R2
add bandwidth=10Mbps interface=ether2-to-R2
/mpls traffic-eng tunnel-path
add name=dyn
add hops=192.168.1.2:strict name=tun-first-link use-cspf=no
/interface traffic-eng
add bandwidth=5Mbps disabled=no name=TE-to-R2 primary-path=tun-first-link record-route=yes reoptimize-interval=5s secondary-paths=dyn to-address=192.168.255.2
------------------------------------------
R2
------------------------------------------
/routing ospf instance
set [ find default=yes ] mpls-te-area=backbone mpls-te-router-id=lo redistribute-connected=as-type-1 router-id=192.168.255.2
/mpls traffic-eng interface
add bandwidth=10Mbps interface=ether1-to-R1
add bandwidth=10Mbps interface=ether2-to-R1
/mpls traffic-eng tunnel-path
add name=dyn
add hops=192.168.1.1:strict name=tun-second-link use-cspf=no
/interface traffic-eng
add bandwidth=5Mbps disabled=no name=TE-to-R1 primary-path=tun-second-link record-route=yes reoptimize-interval=5s secondary-paths=dyn to-address=192.168.255.1
Semoga Bermanfaat
Penulis : Een Pahlefi,S.Kom
Note : jangan bingung, karena jika bingung anda berarti anda kebingungan hahaha.. :p
0 Response to "Cara Configurasi MPLS TE di MikroTik"
Post a Comment