Cara Configurasi CDP Cisco
Switch-ISP-Lama#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
SW-ISP-Lama(config)#cdp run
Switch-ISP-Baru#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
SW-ISP-Baru(config)#cdp run
Switch-ISP-Kuala-Tanjung#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch-ISP-Kuala-Tanjung(config)#cdp run
jika menggunakan router lama, maka harus di buat interface native dlu
---router--
interface FastEthernet0/0.1
encapsulation dot1Q 1 native
ip address 192.168.1.254 255.255.255.0
---switch--
interface Vlan1
ip address 192.168.1.2 255.255.255.0
Switch-ISP-Baru#sh cdp entry *
Device ID: Switch-ISP-Lama
Entry address(es):
IP address : 192.168.1.1
Platform: cisco 2960, Capabilities: Switch
Interface: GigabitEthernet0/1, Port ID (outgoing port): GigabitEthernet0/1
Holdtime: 140
Version :
Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 12-Oct-05 22:05 by pt_team
advertisement version: 2
Duplex: full
---------------------------
Device ID: Switch-Kuala-Tanjung
Entry address(es):
IP address : 192.168.1.3
Platform: cisco 2960, Capabilities: Switch
Interface: GigabitEthernet0/2, Port ID (outgoing port): GigabitEthernet0/2
Holdtime: 177
Version :
Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 12-Oct-05 22:05 by pt_team
advertisement version: 2
Duplex: full
Semoga Bermanfaat
Penulis : Een Pahlefi,S.Kom
0 Response to "Cara Configurasi CDP Cisco "
Post a Comment